Beckett Model AF Oil CF 1400 Manuel D’Utilisation

Page de 16
3
Form 6104 BCF14N-R0299
Instruction Manual – Model CF1400 Oil Burner
Contents
Before you begin . . .
The following resources will give you additional information
for your installation. We suggest that you consult these
resources whenever possible. Pay particular attention to the
appliance manufacturer’s instructions.
Appliance manufacturer’s instructions 
— Always follow
the appliance manufacturer’s instructions for burner
installation, equipment and set-up.
1–800–OIL–BURN
 — Beckett’s technical services hot-line.
www.beckettcorp.com
 — Beckett’s website.
Warranty
Beckett warrants its equipment to those who
have purchased it for resale, including your
dealer. If you have any problems with your
equipment or its installation, you should
contact your dealer for assistance.
Refer to warranty sheet in literature packet
included with burner for details.
Specifications
Fuels
#1 or #2 Fuel Oil
Firing range
4.0 to 10.0 GPH
Motor
½ HP   3450 RPM
120/60 hz standard
6.5 amps @ 120 VAC
Optional voltages:
(60 hz or 50 hz) –
•  
240/1-PH
•  
208/240/480/3-PH
Ignition Trans.
120V/12,000V
Housing
Cast aluminum
Fuel unit
100 - 300 PSIG
Oil nozzle
45° - 70° solid
Shipping wt.
75 lbs.
Dimensions
See Figure 7 (Page 7)
(See 
NOTICE
 on opposite page for 
50 hz
 motor applications.)
Agency approvals
Underwriters Laboratories has certified
this burner to comply with ANSI
Standard 296 and has listed it for use
with No. 1 or No. 2 fuel oil as specified
in ASTM D396. State and local
approvals appear on the burner rating
label.
Certified by ULC.
Approved by Commonwealth of
Massachusetts - State Fire Marshall.
Accepted by N.Y.C. M.E.A.
Other approvals may be available and
must be specified at time of order.