Beckett BRYAN STEAM CF1400 Manuel D’Utilisation
11
Form 6104 BCF23-R05
Figure 8 – Burner installed in appliance front
Dimension
CF 1400
CF 2300
H
18”
18-1/2”
J
10-7/8”
10-1/2”
K
13-5/8
15-5/8”
Insert burner
Position the burner in the front of the appliance and
loosely tighten the nuts on the mounting studs. The
burner should be pitched downward 2° as shown in
Figures 4 and 8.
See Figure 8. Install the pedestal support kit
(recommended) by attaching the 3/4” npt fl ange
(item a) to the bottom of the burner using the (4)
#10 screws provided. Cut and thread (one end only)
a 3/4” pipe nipple (item b) with length 11 inches
less than dimension D in Figure 8. Thread the pipe
into the fl ange. Then slip the pipe end into the fl oor
fl ange (item c).
Secure the burner to the appliance by tightening
the nuts on the burner fl ange mounting studs. Then
secure the pedestal support fl oor fl ange set screw to
the pipe.
loosely tighten the nuts on the mounting studs. The
burner should be pitched downward 2° as shown in
Figures 4 and 8.
See Figure 8. Install the pedestal support kit
(recommended) by attaching the 3/4” npt fl ange
(item a) to the bottom of the burner using the (4)
#10 screws provided. Cut and thread (one end only)
a 3/4” pipe nipple (item b) with length 11 inches
less than dimension D in Figure 8. Thread the pipe
into the fl ange. Then slip the pipe end into the fl oor
fl ange (item c).
Secure the burner to the appliance by tightening
the nuts on the burner fl ange mounting studs. Then
secure the pedestal support fl oor fl ange set screw to
the pipe.
y
y
y
Legend
H Housing total length
J Center to bottom of housing
K Overall housing height