Beckett BRYAN STEAM CF1400 Manuel D’Utilisation
3
Form 6104 BCF23-R05
Before you begin . . .
The following resources will give you addional information for your installation. We suggest that you consult these resources
whenever possible. Pay particular attention to the appliance manufacturer’s instructions.
whenever possible. Pay particular attention to the appliance manufacturer’s instructions.
Appliance manufacturer’s instructions -Always follow the appliance manufacturer’s instructions for burner installation,
equipment and set-up.
equipment and set-up.
1–800–OIL–BURN - Beckett’s technical services hot-line.
www.beckettcorp.com - Beckett’s website.
www.beckettcorp.com - Beckett’s website.
Hazard defi nitions
Intended to bring special attention to information,
but not related to personal injury or property
damage.
Indicates a potentially
hazardous situation,
which, if not avoided,
may result in personal injury or property
damage.
Indicates a potentially
hazardous situation,
which, if not avoided,
could result in death, severe personal injury,
and/or substantial property damage.
Indicates an imminently
hazardous situation,
which, if not avoided, will
result in death, serious injury, or property
damage.
Within the boundaries of the hazard warning, there will
be information presented describing consequences if the
warning is not heeded and instructions on how to avoid
the hazard.
be information presented describing consequences if the
warning is not heeded and instructions on how to avoid
the hazard.
Agency approvals
UL listed to comply with ANSI/
UL296 and certifi ed to CSA B140.0.
UL296 and certifi ed to CSA B140.0.
Accepted by N.Y.C. M.E.A.
Other approvals may be available
and must be specifi ed at time of
order.
and must be specifi ed at time of
order.
y
y
y
y
Specifi cations
Fuels
#1 or #2 Fuel Oil
Firing Range
BCF1400 - 4.0 to 13.6 gph
BCF2300 - 7.0 to 19.9 gph
BCF2300 - 7.0 to 19.9 gph
Motor (CF1400)
Motor (CF2300)
1/2 HP 3450 rpm
120/60 Hz Standard
6.5 amps @ 120 VAC
120/60 Hz Standard
6.5 amps @ 120 VAC
3/4 HP 3450 rpm
120/60 Hz Standard
12.5 amps @ 120 VAC
120/60 Hz Standard
12.5 amps @ 120 VAC
Optional Voltages:
240 VAC/1-PH,
208, 240, 480 VAC/3-PH,
50 Hz
240 VAC/1-PH,
208, 240, 480 VAC/3-PH,
50 Hz
Ignition Trans.
Continuous Duty
Housing
Cast aluminum
Fuel Unit
100 to 300 psig
Oil Nozzle
45
o
to 70
o
Solid
Dimensions
Refer to Figure 7.
NOTICE
To the Owner:
Thank you for purchasing a Beckett burner for use
with your heating appliance. Please pay attention to
the Safety Warnings contained within this instruction
manual. Keep this manual for your records and
provide it to your qualifi ed service agency for use
in professionally setting up and maintaining your
burner.
with your heating appliance. Please pay attention to
the Safety Warnings contained within this instruction
manual. Keep this manual for your records and
provide it to your qualifi ed service agency for use
in professionally setting up and maintaining your
burner.
Your burner will provide years of effi cient operation
if it is professionally installed and maintained by
a qualifi ed service technician. If at any time the
burner does not appear to be operating properly,
immediately contact your qualifi ed service agency
for consultation.
a qualifi ed service technician. If at any time the
burner does not appear to be operating properly,
immediately contact your qualifi ed service agency
for consultation.
We recommend annual inspection/service of your
gas heating system by a qualifi ed service agency.
General Information