Barco Clinical review MDRC-2124 Manuel D’Utilisation

 

 

 

  

13 

Observe the following guidelines to maintain display and LCD screen. 

•  Use a clean, lint-free, absorbent cotton cloth to clear off any 

residual glue from removal of the protective film or to remove 
surface dust. Apply light pressure to remove the dust. 

•  Dampen a clean cloth with a small amount of isopropyl alcohol 

to remove glue or dust if the screen is still not clean. Do not 
saturate the cloth; otherwise, alcohol may seep into the display 
case and collect in the enclosure. Use a clean, dry cloth to 
completely remove the alcohol residue. 

•  It is advised to clean the display on weekly basis. 

•  Do not use chemically treated dust cloths, acetone, toluene, or 

harsh solvents on the display case or the screen. They can 
damage the polarizer and the display case. 

•  Do not expose the display to water or excessive moisture. Do 

not allow water or other stains to stand on the unit. Wipe 
liquids off immediately to prevent damage to the display case 
and the screen. 

Keep the display in its shipping container until installation. Return the 
display to its original container whenever you need to store the unit, 
move it to another location, or return it for repair. The packaging 
supplied by the manufacturer protects the display while it is in transit. 
See environment specifications for more information. 

Before returning the display to the container, do the following: 

1.  Swivel the display panel in portrait mode. 

2.  Push the panel down to the lowest position. 

3.  Use the stand lock to anchor the panel.