Bühler 2895E Manuel D’Utilisation

bühler

Allied Front-End Loader 

- 12 - 

P4493 

All Buhler-Allied hydraulic valves are self-centering and return to neutral from all 
positions except float.  The float or detent spool is only to be used on the boom 
circuit.  This position allows the oil to freely flow through the valve so the lift 
cylinders can extend or retract.  It can be engaged by slightly pushing control 
beyond full lower.  Float will allow for the loader to lower and rise as the 
attachment follows the ground contours.  To disengage float, slightly pull control 
back towards the neutral position.  The Allied Remote Hydraulic Control can be 
locked in the neutral position to minimize unintentional movement. 

 

Lower and dump heavy loads slowly by feathering.  

Stop tractor movement gradually.  Never drop a loaded attachment and “catch” 
hydraulically.  Stopping with such downward momentum may cause damage to 
the loader or tractor. 

When handling heavy loads be sure to raise and lower the loader slowly while 
leveling the attachment as required.  Feathering can assist in accurately 
controlling operations by regulating oil flow through cylinders. 

A third function hydraulic control is available for grapple or other hydraulic 
applications.  An optional divertor valve is connected to the loader attachment 
spool and is operated via the Allied Remote Hydraulic Control momentary switch 
and simultaneously engaging the bucket spool through dump or rollback. 

When loading a bucket, approach straight 
and enter the pile with a level bucket parallel 
to the line of motion. 

Work controls to raise and rollback the bucket 
simultaneously.  The combined actions of lift 
and bucket cylinders increases loading 
efficiency and minimizes resistance to lift.