Bühler 2895E Manuel D’Utilisation
bühler
Allied Front-End Loader
- 19 -
P4493
5. With the tractor in neutral, continue to
retract the lift cylinders and extend the bucket
cylinders to rotate the upright back against
the lock pin stops. Shut the tractor off and
set park brake.
retract the lift cylinders and extend the bucket
cylinders to rotate the upright back against
the lock pin stops. Shut the tractor off and
set park brake.
6.
Install both upright attachment pins
and secure with hairpin clip. Start the tractor
and slowly raise loader until the parking
stands are off the ground.
and slowly raise loader until the parking
stands are off the ground.
WARNING
Shut tractor off and store parking stands within loader
cross tube remembering to stand on the outside of the loader arms. Start the
tractor and continue to cycle loader and attachment to verify loader operation.
tractor and continue to cycle loader and attachment to verify loader operation.
Removing:
WARNING
A bucket or other suitable attachment must be attached
to the loader for stability. Always remove the loader on firm level surface away
from children’s play areas and high traffic areas.
from children’s play areas and high traffic areas.
1.
Raise loader to provide clearance to
engage both parking stands. Shut off tractor.
Standing along the outside of the loader arms
remove parking stands from storage position
and engage within the loader mainframe.
Standing along the outside of the loader arms
remove parking stands from storage position
and engage within the loader mainframe.