Bühler 2895E Manuel D’Utilisation

bühler 

 

 

Allied Front-End Loader 

- 23 - 

P4493     

 

Lower attachment and loader to ground, place all 

controls in neutral, stop engine, set parking brake and remove ignition key before 
inspecting, servicing, adjusting or repairing loader. 

Relieve hydraulic pressure before repairing, adjusting 

or disconnecting hydraulics components.  Escaping hydraulic oil can penetrate 
skin causing serious personal injury.  If injured consult a physician immediately. 

Never work beneath a raised loader unless it is 

securely supported.  The control lever can be moved or a hydraulic leak could 
cause the loader to drop resulting in serious injury or death.  Refer to the 
Hydraulic Lift Lock Instructions Decal for proper use of the lift lock. 

Hydraulic Lift Lock:  The lift lock on your loader is to be used whenever 
someone is attempting to be under the loader or for tractor servicing.  When 
using the lock ensure loader is free of any load in the loader attachment or no 
attachment.

To engage hydraulic lift lock, raise loader to 
desired service height. Rotate lever on 

hydraulic lock 90

o

 clockwise to lock.  Then lock 

joystick in neutral position.  Do not use if there 
are any hydraulic leaks. 

Pins and Bushings:  Every 6 months or 1000 hours check loader and cylinder 
pivots for movement that would be due to bushing or pin wear.  Change bushings 
when excessive movement is noticed and replace any worn or rough surfaced 
pins.