Brother Z-8550A Manuel Du Propriétaire
7. ASSEMBLY
Z-8550A, 8560A
63
7-9. Thread wiper mechanism (8560A only, optional device)
1. Thread wiper base
2. Screws [2 pcs]
3. Solenoid setting plate
4. Screws [2 pcs]
5. Wiper bracket
6. Bolt
7. Washer
8. Retaining ring
9. Presser foot
2. Screws [2 pcs]
3. Solenoid setting plate
4. Screws [2 pcs]
5. Wiper bracket
6. Bolt
7. Washer
8. Retaining ring
9. Presser foot
10. Screw
11. Solenoid cover
12. Screw
13. Screw (Secure the harness.)
11. Solenoid cover
12. Screw
13. Screw (Secure the harness.)
14. 14-pin machine connector
15. (Secure with the 6 screws.)
(1) Black
(2) White
15. (Secure with the 6 screws.)
(1) Black
(2) White
1141B
Align the bottom of the
presser bar bushing with
the bottom of the wiper
bracket.
presser bar bushing with
the bottom of the wiper
bracket.
Check that the thread wiper
connecting rod assembly
moves smoothly and the wiper
bracket is horizontal to the
arm, and then tighten.
connecting rod assembly
moves smoothly and the wiper
bracket is horizontal to the
arm, and then tighten.
0137B
After assembling,
carry out the
adjustments in “9-24.
Adjusting the thread
wiper”.
carry out the
adjustments in “9-24.
Adjusting the thread
wiper”.
1142B
1143B