Bosch Appliances Power Supply PSU-224-DC100 Manuel D’Utilisation

en | Safety

Power Supply

AR18-10-B002 | v1.1 | 2010.02

Installation manual

Bosch Security Systems

All-pole power switch - Incorporate an all-pole power switch, 

with a contact separation of at least 3 mm in each pole, into the 

electrical installation.If it is needed to open the housing for 

servicing and/or other activities, use this all-pole switch as the 

main disconnect device for switching off the voltage to the unit.

Environmental statement - Bosch has a strong commitment 

towards the environment. This unit has been designed to 

respect the environment as much as possible.

Fuse rating - For protection of the device, the branch circuit 

protection must be secured with a maximum fuse rating of 16A. 

This must be in accordance with NEC800 (CEC Section 60).

Grounding and polarization - This unit may be equipped with a 

polarized alternating current line plug (a plug with one blade 

wider than the other blade). This safety feature allows the plug 

to fit into the power outlet in only one way. If unable to insert 

the plug fully into the outlet, contact a locally certified 

electrician to replace the obsolete outlet. Do not defeat the 

safety purpose of the polarized plug.

Alternately, this unit may be equipped with a 3-pole grounding 

plug (a plug with a third pin for earth grounding). This safety 

feature allows the plug to fit into a grounded power outlet only. 

If unable to insert the plug into the outlet, contact a locally 

certified electrician to replace the obsolete outlet. Do not 

defeat the safety purpose of the grounding plug.

Moving - Disconnect the power before moving the unit. Move 

the unit with care. Excessive force or shock may damage the 

unit.

Outdoor signals - The installation for outdoor signals, especially 

regarding clearance from power and lightning conductors and 

transient protection, must be in accordance with NEC725 and 

NEC800 (CEC Rule 16-224 and CEC Section 60).

Permanently connected equipment - Incorporate a readily 

accessible disconnect device external to the equipment.

Pluggable equipment - Install the socket outlet near the 

equipment so it is easily accessible.