Best Data Products DSL542EU Manuel D’Utilisation
DSL542EU ADSL Router User’s Manual
23
5.3.7 Routing
Table
This page displays the routing entries of the Router. You can modify (Delete/Add) static
routing entries here.
If the Router is connected to more than one network, you may need to set up a static route
between them. A static route is a pre-defined pathway that network information must travel to
reach a specific host or network. You can use static routing to allow different IP domain users
to access the Internet through the Router.
routing entries here.
If the Router is connected to more than one network, you may need to set up a static route
between them. A static route is a pre-defined pathway that network information must travel to
reach a specific host or network. You can use static routing to allow different IP domain users
to access the Internet through the Router.
Destination: Destination IP is the address of the remote LAN network or host to which you
want to assign a static route. Enter the IP address of the host for which you wish to create a
static route here.
Netmask: Netmask identifies which portion of an IP address is the network portion, and which
portion is the host portion. For a full Class C Subnet, the Netmask is 255.255.255.0.
Gateway: Gateway IP address should be the IP address of the Router device that allows for
contact between the Router and the remote network or host.
Cost: The Cost determines the maximum number of steps between network nodes that data
packets will travel. A node is any device on the network (such as a router or switch).