Bernina V6 Manuel D’Utilisation

2009 BERNINA

®

 of America, Inc                                               DL                                                                 Page 2 of 3 

 

 

• 

Click on one of the rectangles at the point where the 
stamp will be places and move the cursor to rotate the 
dragonfly as desired. Click a second time to set the stamp. 
Press Esc to deactivate the stamp.  

• 

Click on the inserted dragonfly design, Delete. 

• 

Select the rectangle. Open Object Properties. 

• 

Click on the Fill Stitch Tab. Select Step Stitch 6;  click  Ap-
ply.  

• 

Click on the Stitch Angle Tab and change the stitch angle 
to 0.° 

• 

Click OK to activate the changes and close the dialog box.  

• 

Click on the Appearance tab of the Carving Stamp dialog 
box and select Softened Stamp. 

 

• 

Select the Use Pattern tab from the Carving stamp dialog 
box.  

• 

From the Set selection drop down menu choose Carving 
Stamps. Scroll down to select Ring Ellipse..  

• 

Select the ellipse. Notice that it now appears in the win-
dow.  

• 

Select another rectangle. 

• 

Click  Use Stamp. 

• 

To set the stamps, click on the base fill and rotate the cur-
sor to rotate the stamp as desired; click again to set the 
stamp at that angle. 

⇒ 

To increase the size of the stamp, hold the shift key 
down, and drag the cursor away from the first click and 
click again once the stamp reaches the desired size.  

⇒ 

To decrease the size of the stamp, hold the shift key 
down and drag the cursor toward the first click and click 
again once the stamp reaches the desired size.  

• 

Stamp the background fill as desired. Press Esc.  

• 

Select the background rectangle. Open Object Properties 
and select the Angle tab. Set the stitch angle to 90° and 
click on OK. 

• 

To remove stamps created, click, Clear All Stamps in the 
Appearance tab.