Benq ESG-103 Manuel D’Utilisation
Chapter 2 Hardware Installation - 6
2.5 Power on
(1) Connect your power adapter to DC inlet to power on your ESG-103
(2) Turn on ADSL / Cable modem's power
(3) Finish
2.6 LED Indication
LED
State
Indication
Power
On (Green)
A steady power LED shows that the
power is applied.
power is applied.
Status
On (Orange)
When power is on, ESG-103 will do some
initialization jobs. Then this LED will blink
steadily.
initialization jobs. Then this LED will blink
steadily.
WAN
Link (Green)
When connect to the ADSL / Cable
modem, the LED should be green. If this
LED is not being lighted, this means link
fails.
modem, the LED should be green. If this
LED is not being lighted, this means link
fails.
TX / RX (Green)
When data is transmitted or received, this
LED will be blinking.
LED will be blinking.
LAN
1X,2X,
3X,4X
Link (Green)
When ESG103 is connected to your PC,
the LAN LED should be on.
the LAN LED should be on.
TX / RX (Green)
When data is transmitted or received, this
LED will be blinking.
LED will be blinking.