Balay 3TI60081A Manuel De Montage

9

The detergent drawer is divided into three compartments

Compartment I  : Detergent for prewash.
Compartment II : Detergent for main wash.
Compartment i : Liquid additives such as starch and fabric softener.

Additives are automatically flushed into the machine during the last wash 
cycle.

– Do not exceed the maximum capacity, otherwise compartment i may 

be emptied too early.

– Dilute viscous additives with water before adding them to the detergent 

drawer compartment to prevent blockages.

Liquid detergent insert: must be folded down before liquid detergents 

are used.

To do this:

 Pull out the detergent drawer as far as the stop.
 Press on the blue zone marked 

PUSH and fully remove the detergent 

drawer  page 15.

 Pull the blue insert in 

compartment II fully forward and fold 

downwards.

 Insert the detergent drawer.

Do not use the insert (push upwards):
– with gel-type detergents and washing powder, or
– if using programmes with +Prewash.

Select the correct dosage for the detergent according to:
– the amount of laundry,
– the instructions of the detergent manufacturer,
– how dirty the laundry is,
– water hardness. You can find out about the water hardness in your area 

from your local waterworks.

Using the correct dosage reduces the impact on the environment and 
gives a good washing result.

II

I

i

II

I

i