West Bend SCL5RD - Smoothie Maker, Classic Manuel Du Propriétaire

Before assembling your smoothie maker, wash all parts, 

except for the motor base 

in warm, soapy water, rinse thoroughly and dry.  Unscrew and disassemble the valve 
for cleaning (see Cleaning Your Smoothie Maker section).  To prolong the life of your 
smoothie maker, 

do not wash parts in the dishwasher. 

1.  Position the rubber gasket down onto the circular flat surface in the blade base. 

2.  Screw the blade base on the bottom of the blending jar by twisting the blade 

base clockwise until tightened.  Make sure that the blade base is tightly fastened 
to the blending jar and that the rubber gasket is properly compressed between 
the blending jar and the blade base. 

3.  Place the lid onto the top of the blending jar.  Place the lid cap in the center of 

the lid or place the stir stick through the center of the lid if blending liquids or 
frozen drinks.   

4.  Place the blending jar onto the motor base so that the bottom of the blade base 

is sitting flat on the motor base.   

5.  Plug in the cord.   

6.  Your smoothie maker is now ready to use.   

 

 

4