West Bend 41077 - Bread Maker, 3/4 lb/ Manuel Du Propriétaire

Page de 60
 
13 
12.  Loaf of bread is burned. 
• 
Bread maker is malfunctioning. – See Warranty page for service information. 
13.  Crust too light. 
• 
Not enough sugar or fat. – Increase sugar or fat by half amount recommended. 
 
PAN PROBLEMS 
14.  Knead bar cannot be removed. 
• 
You must add water to bread pan and allow knead bar to soak before it can be 
removed. – Follow cleaning instructions.  You may need to twist bar slightly after 
soaking to loosen.  Do not immerse bread pan in water. 
15.  Bread sticks to pan/difficult to shake out. 
• 
Can happen over prolonged use. – Wipe inside of bread pan, from ribs down 
with vegetable oil/solid shortening, or add 1-tsp. vegetable oil to liquid in pan before 
adding dry ingredients.  Do not use vegetable spray as sticking can worsen.  Or, let 
bread sit in pan for 10 minutes before shaking out.  Replacement pan may be 
ordered.  See Warranty section. 
 
MACHINE MECHANICS 
16.  Ingredients not mixed. 
• 
Did not start machine. – After programming control panel, press Start/Stop 
button to turn on. 
• 
Forgot to put knead bar in pan. – Always make sure knead bar is on shaft in 
bottom of pan before adding ingredients. 
17.  Burning odor noted during operation. 
• 
Ingredients spilled inside oven. – Be careful not to spill ingredients when adding 
to pan as they will burn on heating unit and cause smoke. 
• 
Pan leaks. – Replacement pan may be ordered.  See Warranty section. 
• 
Exceeding capacity of bread pan. – Do not use more ingredients than 
recommended in recipe and always measure accurately. 
18.  Machine unplugged by mistake or power lost during use.  How can I save 
bread? 
• 
If machine is in knead cycle, reprogram to the same bread setting and turn 
machine back on. 
• 
If machine is in rise or bake cycle, preheat conventional oven to 350°F.  
Carefully remove pan from machine and bake on rack in center of oven for 20-25 
minutes or until golden brown. 
19.  Alert sounds, bread select light flashed and machine cannot be turned on. 
• 
Bread maker too hot to make consecutive loaves. – Unplug cord from outlet and 
allow to cool with pan removed and cover open for 15-20 minutes.  Plug cord back in 
outlet, add pan and start machine. 
• 
Bread maker is malfunctioning. – See Warranty section for service information.