West Bend 41077 - Bread Maker, 3/4 lb/ Manuel Du Propriétaire

Page de 60
 
To prevent electrical shock, personal injury or property damage, read and 
follow all instructions and warnings.
 
 
 
 
 
 
 
 
ELECTRICITY PRECAUTIONS 
 
•  To protect against electric shock, do not immerse cord, plugs, or other electric 
parts in water or other liquids. 
•  Do not operate any appliance with a damaged cord or plug. 
•  Do not use electric parts outdoors, or place them on or near a gas or electric 
burner, in a heated oven, refrigerator or freezer. 
•  Do not plug cord into wall outlet unless control is set to OFF position. 
•  Always turn control to OFF and unplug the appliance from outlet when not in use 
and before cleaning.  Allow unit to cool completely before putting or taking off 
parts and before cleaning. 
•  Your breadmaker has a short cord as a safety precaution to avoid pulling, 
tripping or entanglement.  Position the cord so that it does not hang over the 
edge of the counter, table or other flat surface area. 
•  While use of an extension cord is not recommended, if you must use one, make 
sure the cord has the same or higher wattage as the breadmaker (wattage is 
stamped on the underside of the breadmaker).  Arrange the extension cord to 
avoid pulling, tripping or entanglement.  Position the extension cord so that it 
does not hang over the edge of the counter, table or other flat surface area. 
•  Use an electrical outlet that accommodates the polarized plug on the 
breadmaker.  On a polarized plug, one blade of the plug is wider than the other.  
If the plug does not fit fully into the outlet or extension cord, reverse the plug.  If 
the plug still does not fit fully, contact a qualified electrician.  Do not alter the 
plug. 
•  Do not use an outlet or extension cord if the plug fits loosely or if the outlet or 
extension cord feels hot. 
•  Keep the cord away from hot parts of the appliance and hot surfaces during 
operation. 
•  Do not use your breadmaker with a converter or transformer.  This will destroy 
the electronic controls.