Whirlpool ACM122XR0 Manuel D’Utilisation

4. Attach window-lock bracket to window sash with #8 x 

³⁄₄" 

round-head screw to secure window in place.

  

5. Plug into a grounded 3 prong outlet.

6. Press RESET on the power supply cord plug.

Operating your air conditioner properly helps you to obtain the 
best possible results. 

This section explains proper air conditioner operation.

IMPORTANT: 

■

If you turn off the air conditioner, wait at least 3 minutes 
before turning it back on. This prevents the air conditioner 
from blowing a fuse or tripping a circuit breaker.

■

Do not try to operate your air conditioner in the cooling mode 
when outside temperature is below 65°F (18°C). The inside 
evaporator coil will freeze up, and the air conditioner will not 
operate properly.

1. Remove the clear, protective film from the front panel badge 

(on some models).

2. Set the exhaust control. See “Exhaust (on some models).”

3. Set fan speed. See “Fan.”

4. Select the temperature. See “Thermostat.”

Set the Exhaust control to CLOSED for maximum continuous 
cooling. The Exhaust control set to OPEN position allows you to 
draw stale or smoky air from the room.

■

Open—to exhaust room air to the outside

■

Closed—to circulate room air

NOTE: The Exhaust control will function only when the Fan is 
operating.

Set the Fan control to the desired setting. When the air 
conditioner is operating at Low Cool, High Cool, or Turbo Cool, 
the fan circulates air continuously.

■

Turbo Cool—for maximum cooling

■

High Cool—for normal cooling

■

Low Cool—for sleeping comfort

■

Fan Only—fan will run continuously to move air, but the air 
will not be cooled.

NOTE: Fan runs on Turbo speed only.

■

Power Saver (on some models)—The fan runs only when 
cooling is needed. 

Since the fan does not circulate the room air continuously, 
less energy is used but the room air is not circulated as often. 
Use Power Saver when you are asleep or away from home.

NOTE: Fan runs on Low speed only.

A

B