West Elm Faceted Mirror Sconce Instructions De Montage
Important Safety Instructions:
These instructions are provided for your safety. It is important that they are read carefully and completely
before installing the chandelier.
We strongly recommend that a professional electrician install all direct wire fi xtures.
This fi xture has been rated for up to 60-watt TYPE A bulbs (not included). To avoid the risk of fi re, do not
exceed the recommended wattage.
Pre-assembly:
Remove all parts and hardware from box along with any plastic protective packaging. Do not discard any
contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
For your safety and convenience, assembly by two people is recommended.
WARNING: This lighting fi xture contains lead, a chemical known to the State of California to cause cancer,
birth defects and other reproductive harm. Wash hands after installing, handling, cleaning or otherwise
touching this light fi xture
Parts Enclosed:
(1) Mounting plate (D)
(1) Canopy (F)
(1) Canopy screws (E)
(1) Shade (F)
These instructions are provided for your safety. It is important that they are read carefully and completely
before installing the chandelier.
We strongly recommend that a professional electrician install all direct wire fi xtures.
This fi xture has been rated for up to 60-watt TYPE A bulbs (not included). To avoid the risk of fi re, do not
exceed the recommended wattage.
Pre-assembly:
Remove all parts and hardware from box along with any plastic protective packaging. Do not discard any
contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
For your safety and convenience, assembly by two people is recommended.
WARNING: This lighting fi xture contains lead, a chemical known to the State of California to cause cancer,
birth defects and other reproductive harm. Wash hands after installing, handling, cleaning or otherwise
touching this light fi xture
Parts Enclosed:
(1) Mounting plate (D)
(1) Canopy (F)
(1) Canopy screws (E)
(1) Shade (F)
Hardware Included:
•(2) Mounting screws (C)-1pc extra
•(1) Green ground screws (B)
•(3) Plastic wire connectors (A)
•(2) Mounting screws (C)-1pc extra
•(1) Green ground screws (B)
•(3) Plastic wire connectors (A)
To install you will need:
•Electrical tape
•Screwdriver
•2 people recommended
•Electrical tape
•Screwdriver
•2 people recommended
To Assemble:
SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER.
Carefully unpack all fi xture parts and hardware and lay out on a clear workspace.
1. Care fully inspect the Sconce's fi xture wires. The NEUTRAL FIXTURE WIRE is White or marked “N”. The HOT
FIXTURE WIRE is Black or marked “L”. The yellow-green or bare wire is the GROUND WIRE.
2. Cut off the otiose Power cord and steel wire
3. Attach the GROUND WIRE from the fi xture to the GROUND JUNCTION BOX WIRE from the outlet (usually
green or bare wire). Fasten each together with a plastic wire connector (A) and wrap the connection with
electrical tape. Be sure that no wire strands are exposed. If your outlet box DOES NOT have a GROUND WIRE,
be sure to insert the green ground screw (B) into the Mounting plate (D) facing DOWN, and wrap the fi x-
ture's bare ground wire around the ground screw. IT IS IMPERATIVE THAT THE OUTLET BOX IN YOUR HOME
BE PROPERLY GROUNDED.
Connect the NEUTRAL FIXTURE WIRE to the NEUTRAL JUNCTION BOX WIRE (white) or marked “N”. Fasten
each together with a plastic wire connector (A) and wrap the connection with electrical tape. Be sure no wire
strands are exposed.
SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER.
Carefully unpack all fi xture parts and hardware and lay out on a clear workspace.
1. Care fully inspect the Sconce's fi xture wires. The NEUTRAL FIXTURE WIRE is White or marked “N”. The HOT
FIXTURE WIRE is Black or marked “L”. The yellow-green or bare wire is the GROUND WIRE.
2. Cut off the otiose Power cord and steel wire
3. Attach the GROUND WIRE from the fi xture to the GROUND JUNCTION BOX WIRE from the outlet (usually
green or bare wire). Fasten each together with a plastic wire connector (A) and wrap the connection with
electrical tape. Be sure that no wire strands are exposed. If your outlet box DOES NOT have a GROUND WIRE,
be sure to insert the green ground screw (B) into the Mounting plate (D) facing DOWN, and wrap the fi x-
ture's bare ground wire around the ground screw. IT IS IMPERATIVE THAT THE OUTLET BOX IN YOUR HOME
BE PROPERLY GROUNDED.
Connect the NEUTRAL FIXTURE WIRE to the NEUTRAL JUNCTION BOX WIRE (white) or marked “N”. Fasten
each together with a plastic wire connector (A) and wrap the connection with electrical tape. Be sure no wire
strands are exposed.