Weslo WLEL1405.1 Manuel Du Propriétaire

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included allen wrenches, assembly requires a Phillips screwdriver                      , an adjustable
wrench                     , and a rubber mallet                        .

As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST on page 14. The second number is the
quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the
parts bag, check to see if it has been pre-assembled. 

M4 x 12mm

Screw (43)–5

M10

Washer (35)–2

M10 Split

Washer (59)–2

M10 Nylon

Locknut (33)–6

Pedal Arm Bolt Set (40)–2

M6 Nylon

Locknut (27)–4

M10 x 25mm

Patch Screw (22)–2

M10 x 75mm Carriage Bolt (34)–4

M10 x 68mm Button Bolt (48)–2

M6 x 38mm Button Bolt (50)–4

M6 x 45mm Flat Head

Screw (36)–4

Wave Washer

(64)–2

1. Identify the Front Stabilizer (10), which is narrower than

the Rear Stabilizer (not shown). While another person
lifts the front of the Frame (1), attach the Front
Stabilizer to the Frame with two M10 x 75mm Carriage
Bolts (34) and two M10 Nylon Locknuts (33).

10

33

34

1

1