Wybron pmn Manuel D’Utilisation

4

The Coloram II System consists of one or more Color Changers or 
other components and a remote Power Supply. The DMX512 control 
signal from the lighting board is connected to the Power Supply and 
can continue on to more Coloram II Power Supplies or other DMX-
controlled devices. The Power Supply sends both power and control 
signal on a single cable eliminating the need for a separate power cable 
for each Color Changer. 

The Coloram II System also allows you to control the Color Changer fan 
speed via one or multiple DMX channels on the lighting console.

The Coloram II System is equipped with the Intelligent Diagnostic 
System (IDS).  Status information is sent from each of the Coloram 
Color Changers to the Coloram Power Supply. The Power Supply in 
turn transmits the information along pins 4 and 5 of the DMX cable to 
The Watchdog Status Monitor.  The Watchdog then displays Color 
Changer status information at your lighting console position.

Caution:  The Coloram II System is not compatible with The Forerunner 
System. Do not connect Coloram Color Changers to Forerunner Power 
Supplies, or Forerunner Color Changers to Coloram Power Supplies. 

Damage from such action will not be covered by the Coloram or 
Forerunner warranties.