Worth Data 5000 Manuel D’Utilisation

TABLE FORMAT ERROR

PRESS ANY KEY_

The table header is in an invalid format
or EOF Ctrl Z (ASCII 26) is missing.

Check table file for format

errors. Try again.

TABLE NOT FOUND

HIT ANY KEY_

A table referenced in a data collection
program does not exist.

Download table or correct

program to reference correct
table.

UPLOADING DATA

PLEASE WAIT_

Collected data is being uploaded to
host.

Wait for upload to finish.

USB Enumeration
Please wait…

At power on or when a cable is plugged
in, TriCoder must enumerate as a USB
device. Also happens when changing
modes.

Just wait a few seconds.

There is nothing to do.

Advisory only.

USB not Connected

Connect Cable,

Then Press a Key

Or F1 to Exit

Computer Interface is set to USB.

A mode has been selected to transfer
data. The USB cable is not plugged in.

Connect USB cable and press
a key or F1 to Exit to Mode
Menu.

USB not Connected

Connect, Hit any Key

or F1

– Exit

or F2

– Display Only

You  have  answered  YES  to  Non
Portable  Mode  when  the  TriCoder  is
configured  for  USB  interface  and  NOT
connected  to  the  USB  port  on  the
computer.

If you want to see the data on
the  computer,  connect  to  the
USB port, then press any key.
Press  F1  to  exit  Non  Portable
Mode  or  press  F2  to  simply
display  the  data  on  the
TriCoder

screen

without

transmitting to the computer.

USB not Connected

Connect, Hit any Key

or F1

– Exit

or F2

– Delete File

You  have  answered  YES  to  Data
Upload  Mode  when  the  TriCoder  is
configured  for  USB  Interface  and  is
NOT connected to the USB port on the
computer.

If you want to upload via the
USB

port,

connect

the

TriCoder  to  the  USB  port  and
press  any  key.  Press  F1  to
exit  Data  Upload  Mode  or
press F2 to delete the data file
from  the  TriCoder  without
transmitting it to the computer

WARNING: 2K OF MEMORY LEFT

HIT ANY KEY_

You are close to filling the memory and
should upload before you can collect
any more data.

HIT ANY KEY. Upload data
and

continue

with

data

collection.

WARNING: LOW BATTERIES

HIT ANY KEY TO CONTIINUE

The battery charge level is getting low.
If you continue to the use the TriCoder
it will automatically shut down when the
battery is depleted.

Charge

the

battery

and

resume operation.

WRONG INPUT DEVICE

HIT ANY KEY_

The input device you are using is not
what is specified in your program.

Use the correct input device or
change the specification in
your program.