Braun Multiquick 3 5 Water Kettle WK300 WK500 Manuel Du Propriétaire

 

6

 

a  Scale filter (removable) 
b Lid 
c  Lid release button 
d On/off 

switch 

e  Water level indicator 
f Pilot 

light 

g  Base with cord storage 

• Max. capacity: 1.7 l water 

 

Before using the kettle for the first time, fill it 
up twice with water to the maximum level and 
bring it to boil. Empty the kettle after boiling each 
time.
After repeatedly boiling water it is normal that 
some condensation may have formed on the 
base of the water kettle. 
If this happens, just wipe dry with a cloth.

 

1a Fill the kettle through the spout with the lid 

closed, or

1b press the lid release button (c), open the lid, fill 

with water and close the lid again (the kettle 
will not work with the lid open).

2  Place the kettle on the dry base and plug in 

the base.

3  Press the on/off switch (d), the pilot light will 

come on (do not open the lid when the kettle 
is switched on).

4  When the water has boiled, the kettle auto-

matically switches off.
You may also stop the heating procedure at 
any time by pressing the on/off switch (d). 

 

The kettle switches off when ...
–

the water has boiled,

–

it contains no water 
(in case of accidental switching on),

–

the lid is opened,

–

it is taken off the base.

If the scale filter is not installed, the automatic 
cut-off will be delayed.

 

Before cleaning, unplug the base.
Kettle or base must never be immersed in water.
Clean the outside of the kettle with a damp cloth, 

the inner part can be cleaned by means of a 
brush. The removable scale filter is dishwasher-
proof.

 

•

To extend the kettle’s lifetime and save energy, 
we recommend the following descaling 
frequency: 
– Every 3 months in case of normal use 

(up to 5 times a day) with low to medium 
water hardness.

– Every month in case of more frequent usage 

or with hard water.

The water hardness you can check with your 
local water supplier.

•

Boil 0.8 l water in the kettle.

•

Important: Switch off the kettle and add 0.4 l 
household vinegar (4% acid). Do not boil 
the contents as it may cause spilling being a 
danger of scalding.

•

Let the mix of water and vinegar sit in the 
kettle overnight.

•

Empty the kettle and rinse the inside thor-
oughly with fresh water. Fill the kettle with 
fresh water and boil it.

•

Empty the kettle and rinse it again with fresh 
water.

•

If the kettle still contains scale, repeat this 
procedure.

•

To remove any scale from the scale filter, you 
may soak it in diluted vinegar.

Subject to change without notice.

Please do not dispose of the product in the 
household waste at the end of its useful life. 
Disposal can take place at a Braun Service 
Centre or at appropriate collection points 
provided in your country.
 

 

92266143_WK500_MN_S4-50  Seite 6  Dienstag, 17. April 2012  2:50 14