Whirlpool W10110369 Manuel D’Utilisation

Page de 24
17
Style 2 - Electric Oven Control
The AUTO-CLEAN cycle time is adjustable, from 2 hours 
30 minutes
 and 4 hours 30 minutes in 15-minute increments. 
Suggested clean times are 2 hours 30 minutes for light soil and 
4 hours 30 minutes for heavy soil. The last 30 minutes of the 
cycle is for cool down.
To Self-Clean Using AUTO-CLEAN
1. Press AUTO-CLEAN.
2. Press the TEMP/HOUR “up” or “down” arrow pad to set the 
desired self-clean cycle time.
 
3. Press START.
The oven door will automatically lock. The “DOOR LOCKED” 
and “CLEAN” indicator lights will be displayed. The time 
remaining will also be displayed. 
4. When the self-clean cycle is complete and the oven cools, 
the “DOOR LOCKED” and “CLEAN” indicator lights will turn 
off.
5. Once the oven is completely cooled, remove ash with a damp 
cloth.
To Delay Start Self-Clean Using AUTO-CLEAN
1. Press AUTO-CLEAN.
2. Press the TEMP/HOUR “up” and “down” arrow pads to set 
the desired self-clean cycle time.
3. Press START TIME.
4. Press the TEMP/HOUR “up” and “down” arrow pads to set 
the desired start time.
5. Press START.
The oven door will automatically lock. “DOOR LOCKED” and 
“CLEAN” indicator lights will be displayed. 
6. When the self-clean cycle is complete and the oven cools, 
the “DOOR LOCKED” and “CLEAN” indicator lights will turn 
off.
7. Once the oven is completely cooled, remove ash with a damp 
cloth.
Style 3 - Electric Oven Control
The AUTO-CLEAN cycle can be set at one of two levels, HI clean 
time (4 hours 30 minutes) or LO clean time (3 hours 30 minutes). 
Suggested clean times are 3 hours 30 minutes for light soil and 
4 hours 30 minutes for heavy soil. The last 30 minutes of the 
cycle is for cool down.
To Self-Clean
1. Press AUTO-CLEAN to set the clean time to HI (4 hours 
30 minutes). 
2. Press the TEMP/HOUR “down” arrow keypad to choose 
between LO and HI clean time,.
3. Press START.
4. The oven door will automatically lock. The “CLEAN” indicator 
light will be displayed. The time remaining will also be 
displayed.
5. When the self-clean cycle is complete and oven cools, the 
“CLEAN” indicator light will turn off.
6. Once the oven is completely cooled, remove ash with a damp 
cloth.
Delay start self-clean cycle is not available with Style 3 models.
General Cleaning
IMPORTANT: Before cleaning, make sure all controls are off and 
the oven and cooktop are cool. Always follow label instructions 
on cleaning products. Do not wipe down any of the inside 
surfaces until the oven has completely cooled down. Applying a 
cool damp cloth to the inner door glass before it has cooled 
completely could result in the glass breaking.
Soap, water and a soft cloth or sponge are suggested first unless 
otherwise noted.
EXTERIOR PORCELAIN ENAMEL SURFACES
(on some models)
Food spills containing acids, such as vinegar and tomato, should 
be cleaned as soon as the entire appliance is cool. These spills 
may affect the finish.
Cleaning Method:
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing 
pad:
Gently clean around the model and serial number plate 
because scrubbing may remove numbers.
All-Purpose Appliance Cleaner Part Number 31662 (not 
included):
See “Assistance or Service” section to order.
STAINLESS STEEL (on some models)
To avoid damage to stainless steel surfaces, do not use soap-
filled scouring pads, abrasive cleaners, Cooktop Polishing 
Creme, steel-wool pads, gritty washcloths or some paper towels. 
Rub in direction of grain to avoid damaging.
Cleaning Method:
Stainless Steel Cleaner & Polish Part Number 31462 (not 
included): 
See “Assistance or Service” section to order.
Liquid detergent or all-purpose cleaner:
Rinse with clean water and dry with soft, lint-free cloth.
Vinegar for hard water spots.
METALLIC PAINT (on some models)
Do not use abrasive cleaners, cleaners with bleach, rust 
removers, ammonia or sodium hydroxide (lye) because paint 
surface may stain. 
COOKTOP CONTROLS
Do not use steel wool, abrasive cleansers or oven cleaner.
Do not soak knobs. When replacing knobs, make sure knobs are 
in the Off position.
On some models, do not remove seals under knobs.
Cleaning Method:
Soap and water or dishwasher:
Pull knobs straight away from control panel to remove.