Whirlpool W10110357 Manuel D’Utilisation

Page de 32
7
Cookware
IMPORTANT: Do not leave empty cookware on a hot surface 
cooking area, element or surface burner.
Ideal cookware should have a flat bottom, straight sides and a 
well-fitting lid, and the material should be of medium-to-heavy 
thickness.
Rough finishes may scratch the cooktop or grates. Aluminum and 
copper may be used as a core or base in cookware. However, 
when used as a base they can leave permanent marks on the 
cooktop or grates.
Cookware material is a factor in how quickly and evenly heat is 
transferred, which affects cooking results. A nonstick finish has 
the same characteristics as its base material. For example, 
aluminum cookware with a nonstick finish will take on the 
properties of aluminum.
Cookware with nonstick surfaces should not be used under the 
broiler.
Use the following chart as a guide for cookware material 
characteristics.
ELECTRONIC OVEN CONTROL
Display
When power is first supplied to the appliance, a flashing time will 
appear on the display. Press CANCEL/OFF to clear flashing time 
from the display. 
If flashing time appears, a power failure has occurred. Press 
CANCEL/OFF and reset the Clock if needed.
When the oven is not in use, the display shows the time of day.
When performing a cook or timer function, the display will show 
either hours and minutes, or minutes and seconds.
Oven Indicator Lights
The indicator lights are located on both sides of the display. The 
indicator lights light up or flash when the oven is in one of the 
following modes: Bake, Broil or Timer.
Start
The START pad begins any oven function. If the START pad is not 
pressed within 5 seconds after pressing a function pad, the Push 
to Start (“PSH”) indicator light will flash and the push to start tone 
will sound as a reminder.
If the START pad is not pressed within 1 minute after pressing a 
function pad, the oven display will return to the time of day mode 
and the programmed function will be canceled.
Cancel/Off
The CANCEL/OFF pad stops any function except the Clock, 
Timer and Control Lock.
COOKWARE
CHARACTERISTICS
Aluminum
Heats quickly and evenly.
Suitable for all types of cooking.
Medium or heavy thickness is best for 
most cooking tasks.
Cast iron
Heats slowly and evenly.
Good for browning and frying.
Maintains heat for slow cooking.
Ceramic or 
Ceramic glass
Follow manufacturer’s instructions.
Heats slowly, but unevenly.
Ideal results on low to medium heat 
settings.
Copper
Heats very quickly and evenly.
Earthenware
Follow manufacturer’s instructions.
Use on low heat settings.
Porcelain 
enamel-on-
steel or cast 
iron
See stainless steel or cast iron.
Stainless steel
Heats quickly, but unevenly.
A core or base of aluminum or copper 
on stainless steel provides even 
heating.
A. Oven light
B. Clock
C. Bake indicator light
D. Display
E. Start (control lock)
F. Cancel/off
G
.
Temp/hour
H. Broil
I. Bake
J. Broil indicator light
K. Timer
A
B
C
D
E
F
H
G
I
J
K