Whirlpool GR450LXL Manuel D’Utilisation
16
Prepare Cooktop and Storage Drawer:
■
Remove plastic items from the cooktop because they may
melt.
melt.
■
Remove all items from the storage drawer.
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in the
oven may result in discoloring, loss of gloss, hairline cracks and
popping sounds.
oven may result in discoloring, loss of gloss, hairline cracks and
popping sounds.
The Self-Cleaning cycle uses very high temperatures, burning soil
to a powdery ash.
to a powdery ash.
The oven is preset for a 3
hour 30 minute clean cycle, but the
time can be changed. Suggested clean times are 2 hours 30
minutes for light soil and between 3
minutes for light soil and between 3
hours 30 minutes to 4 hours
30 minutes for average to heavy soil.
Once the oven has completely cooled, remove ash with a damp
cloth.
cloth.
The oven light will not work during the Self-Cleaning cycle.
To Self-Clean:
Before self-cleaning, make sure the door is closed completely or
it will not lock and the cycle will not begin.
it will not lock and the cycle will not begin.
1. Press AUTO CLEAN.
2. Press the HR and MIN “up” or “down” arrow pad to set a
clean time other than 3
hours 30 minutes. The clean time can
be set between 2 hours 30 minutes
and 4 hours 30 minutes.
3. Press START.
The oven door will automatically lock. “LOCKED” will appear
on the display. The door will not unlock until the oven cools.
on the display. The door will not unlock until the oven cools.
When the cycle is complete and the oven cools, “End” will
appear on the oven display and “LOCKED” will disappear.
appear on the oven display and “LOCKED” will disappear.
4. Press CANCEL or open the oven door to clear the oven
display.
To Delay Start Self-Clean:
Before delay starting Self-Clean, make sure the clock is set to the
correct time of day. See “Clock” section. Also, make sure the
door is closed completely or it will not lock and the cycle will not
begin.
correct time of day. See “Clock” section. Also, make sure the
door is closed completely or it will not lock and the cycle will not
begin.
1. Press AUTO CLEAN.
Press the HR “up” or “down” arrow pad to set a clean time
other than 3
other than 3
hours 30 minutes. The clean time can be set
between 2 hours 30 minutes
and 4 hours 30 minutes.
2. Press DELAY START.
3. Press the HR and MIN “up” or “down” arrows pads to enter
the time of day to start.
4. Press START.
The start time is automatically calculated and displayed.
The door will automatically lock, and “LOCKED” and
“DELAY” will appear on the display. The door will not unlock
until the oven cools.
“DELAY” will appear on the display. The door will not unlock
until the oven cools.
When the start time is reached, the oven will automatically
turn on.
turn on.
When the cycle is complete and the oven cools, “End” will
appear on the lower oven display and “LOCKED” will
disappear.
appear on the lower oven display and “LOCKED” will
disappear.
5. Press any pad or open the oven door to clear the oven
display.
To Stop Self-Clean at any time:
Press CANCEL. If the oven temperature is too high, the door will
remain locked. It will not unlock until the oven cools.
remain locked. It will not unlock until the oven cools.
General Cleaning
IMPORTANT: Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Always follow label instructions
on cleaning products.
the oven and cooktop are cool. Always follow label instructions
on cleaning products.
Soap, water and a soft cloth or sponge are suggested first unless
otherwise noted.
otherwise noted.
EXTERIOR PORCELAIN ENAMEL SURFACES
(on some models)
(on some models)
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the entire appliance is cool. These spills
may affect the finish.
be cleaned as soon as the entire appliance is cool. These spills
may affect the finish.
■
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing
pad: Gently clean around the model and serial number plate
because scrubbing may remove numbers.
pad: Gently clean around the model and serial number plate
because scrubbing may remove numbers.
CERAMIC GLASS (on some models)
Do not use steel wool, abrasive powder cleansers, chlorine
bleach, rust remover or ammonia because damage may occur.
bleach, rust remover or ammonia because damage may occur.
Always wipe with a clean, wet cloth or sponge and dry thoroughly
to prevent streaking and staining.
to prevent streaking and staining.
Cooktop Polishing Creme is recommended for regular use to help
prevent scratches, pitting and abrasions, and to condition the
cooktop. It may be ordered as an accessory. See “Assistance or
Service” to order.
prevent scratches, pitting and abrasions, and to condition the
cooktop. It may be ordered as an accessory. See “Assistance or
Service” to order.
A Cooktop Scraper is also recommended for stubborn soils, and
can be ordered as an accessory. See “Assistance or Service” to
order. The Cooktop Scraper uses razor blades. Store razor
blades out of the reach of children.
can be ordered as an accessory. See “Assistance or Service” to
order. The Cooktop Scraper uses razor blades. Store razor
blades out of the reach of children.
Light to moderate soil
■
Paper towels or clean damp sponge: Clean while the cooktop
is still warm. You may want to wear oven mitts while doing so.
is still warm. You may want to wear oven mitts while doing so.
Sugary spills (jellies, candy, syrup)
■
Cooktop Scraper: Clean while the cooktop is still warm. You
may want to wear oven mitts while doing so.
may want to wear oven mitts while doing so.
■
Cooktop Polishing Creme and clean damp paper towel:
Clean as soon as cooktop has cooled down. Rub creme into
surface with a damp paper towel or soft cloth. Continue
rubbing until white film disappears.
Clean as soon as cooktop has cooled down. Rub creme into
surface with a damp paper towel or soft cloth. Continue
rubbing until white film disappears.
Heavy soil, dark streaks, specks and discoloration
■
Cooktop Polishing Creme or nonabrasive cleanser: Rub
product into soil with a damp paper towel or soft cloth.
Continue rubbing until white film disappears.
product into soil with a damp paper towel or soft cloth.
Continue rubbing until white film disappears.
Burned-on soil
■
Cooktop Polishing Creme and Cooktop Scraper: Rub creme
into soil with damp paper towel. Hold scraper as flat as
possible on surface and scrape. Repeat for stubborn spots.
Polish entire cooktop with creme and paper towel.
into soil with damp paper towel. Hold scraper as flat as
possible on surface and scrape. Repeat for stubborn spots.
Polish entire cooktop with creme and paper towel.