Whirlpool GGG388LXB Manuel D’Utilisation

When power is first supplied to the range, or if a power failure has 
occurred, 12:00 will appear on the display. See “Clock” in the 
“Settings” section to set time of day.

When the oven is not in use, the display shows the time of day, 
unless the oven is in Energy Save mode.

The Cancel pad stops any function except the Clock, Timer and 
Control Lock.

While the oven doors are closed, press OVEN LIGHT to turn the 
lights on and off. Both oven lights will come on when either door 
is open. The oven lights will not come on during the Self-Clean 
cycle.

The Kitchen Timer can be set in hours or minutes up to 9 hours 
and 59 minutes, and counts down the set time. The Kitchen 
Timer does not start or stop the oven.

1. Press TIMER SET/OFF pad.

“Set TIMER” will scroll down the upper text display area and 
the clock will display “--:--” with the colon flashing.

2. Press the Temp/Time “up” or “down” arrow pads until the 

desired time is reached.

“Press TIMER” will scroll down the upper text display area.

3. Press TIMER SET/OFF to start the timer.

The colon stops flashing, and the time begins counting down. 
“TIMER STARTED” will scroll down the upper text display 
area.

The last minute of the timer countdown will be displayed in 
seconds.

At the end of the set time, one long beep will sound, and 
“TIMER End” will be displayed.

4. Press TIMER SET/OFF to clear the display.

NOTE: A reminder beep will sound until the Kitchen Timer is 
canceled.

Press the TIMER SET/OFF pad.

Settings enables you to personalize audible tones and oven 
operation to suit your needs. After completing your adjustments, 
press CANCEL or wait 30 seconds for the display to show the 
time of day.

The Energy Save mode deactivates the display to reduce energy 
consumption.

1. Press and hold SETTINGS for 3 seconds. “Energy save on.” 

will appear in the upper text area.

2. The setting will be activated after 5 minutes.

Any mode may be used with the range in Energy Save by 
simply selecting the desired mode.

1. Press and hold SETTINGS for 3 seconds. “Energy save off.” 

will appear in the upper text area.

2. The clock will reappear in the display, and the range can be 

operated as usual.

The temperature is factory preset to Fahrenheit, but can be 
changed to Celsius. 

1. Press SETTINGS once. 

“TEMP UNIT” will appear in the upper text area, while 
“FAHRENHEIT. Press (^) for Celsius” will scroll twice from 
right to left in the lower text area.

2. Press the Temp/Time “up” arrow pad to change the 

temperature unit setting.

“CELSIUS. Press (^) for Fahrenheit” will scroll twice from right 
to left in the lower text area.

3. “CELSIUS Selected” will scroll right to left in the lower text 

area. The temperature units have been changed.

Tones are audible signals, indicating the following:

■

Valid pad press

■

End of Kitchen Timer (long tone)

■

Function has been entered

■

Oven is preheated

■

Invalid pad press

■

End of cycle

The oven sound is factory set for On but can be changed to Off. 

1. Press SETTINGS twice until “SOUND” appears in the upper 

text area and “ON. Press (^) for OFF” scrolls twice from right 
to left in the lower text area.

2. Press the Temp/Time “up” arrow pad to turn the sound Off.

“OFF. Press (^) for ON” will scroll twice from right to left in the 
lower text area. 

3. “OFF Selected” will scroll from right to left in the lower text 

area. The sound has now been turned off.

The oven sound is factory preset for High but can be changed to 
Low. 

1. Press SETTINGS 3 times until “SOUND VOLUME” appears in 

the text area and “HIGH. Press (^) for LOW” scrolls twice 
from right to left in the lower text area.

2. Press the Temp/Time “up” arrow pad to turn the sound Low. 

“LOW. Press (^) for HIGH” will scroll twice from right to left in 
the lower text area.

3. “Low Selected” will scroll twice from right to left in the lower 

text area. The sound volume has now been changed.