GE ERESCO MF4 Brochure

ERESCO 52 MF4-CL

The ERESCO 52 MF4-CL is a 300 kV con-

stant potential portable X-ray tube 

head using state of the art switching 

technology with high radiation output 

allowing shortest exposure times there-

by increasing productivity.
GE Sensing & Inspection Technologies 

uses the number 52 to identify the superi-

or penetration performance of its portable 

X-ray unit line. This means the ERESCO 52 

MF4-CL is capable of penetrating 52 mm 

(2.01”) Fe with a 2.0 density after a ten-

minute exposure using AGFA STRUCTURIX 

D7 film @ 700 mm (27.5”) FFD.
The X-ray tube head consists of a sturdy 

metal-ceramic X-ray tube and high volt-

age generator integrated into a rugged 

compact housing. The air-cooled 300 KV/ 

600 W end-grounded X-ray tube is ther-

mally protected for extended life.

The high voltage generator generates 

high-stability constant potential volt-

age at higher efficiency than conven-

tional line frequency equipment.
The performance of the X-ray tube and 

the high voltage generator is continu-

ously monitored for protection and op-

erational safety. An on-board real time 

clock facilitates fully automatic warm-

up routines for optimized and time-

saving tube conditioning. The flexible 

connecting cable is heavy-duty and 

light weight.

•  Rugged construction with proven reliability
•  Gas insulated high voltage section reduces size & weight 
•  End-grounded, metal-ceramic X-ray tube
•  DC voltage operation
•  Modern power electronics provides high stability
•  On-board real time clock supports fully automatic warm-up 
•  Extended operating range from 5 kV to 300 kV enables flexible use
•  Large 38° x 360° emergent beam
•  Optimized air-flow cooling for efficient heat dissipation
•  100% duty cycle at 30° Celsius (86° F) 
•  Built-in fail-safe warning lamp
•  CE certification according to EMC and Low Voltage Directives
•  Water / dust resistant in accordance with protection class IP65
•  Produced under ISO 9001 certified quality management system

See product info “ERESCO MF4 Control” 

GE

Sensing & Inspection Technologies