Soho RAID SR2000 Manuel D’Utilisation

2-5 Installing HDD in the Removable Carrier

Set Master/Slave jumpers to MASTER (factory default).

Connect the power cord and the Removable Carrier’s
EIDE/IDE interface cable to the HDD.

Inset the HDD into the Removable Carrier.

Fasten the HDD with the attached 6#-32 screws in their
four locations. Place the power cord and the EIDE/IDE
interface cable lower than the surface of the HDD in order
to avoid any hindrance when taking out the HDD. Please
refer to the following illustration.

6#32 –

4 screws

SOHO RAID