Siemens AC75 Manuel D’Utilisation

s

AC75_ATC_V01.002

Page 182 of 569

10/30/06

Confidential / Released

 covers essentially the same information as GSM 07.07 command 

, with the following addi-

tions: 
• The execute command response contains the additional parameter 

 which

indicates whether the call has been assigned a traffic channel by the network and transmission of DTMF

tones is possible. 

• The additional write command allows to activate Event reporting for the list of current calls. If event reporting

is active for an interface, a call status transition (cf. 

) and (if desired) the

assignment of a traffic channel will generate an event report indication to this interface. In order to receive

this event report as an URC, the URC presentation mode for this interface has to be configured with

. 

The frequency of event report generation can be configured with AT command 

 for further detail on the configuration options. 

• The additional read command allows to determine the event reporting mode 

 which indicates whether the

interface receives event report indications for the list of current calls. Mind that the URC will be displayed only

if the URC presentation mode for the interface concerned has been configured with 

. 

Test Command

AT^SLCC=?

Response(s)

^SLCC: 

(list of supported

OK

Read Command

AT^SLCC?

Response(s)

OK

Exec Command

AT^SLCC

Response(s)

[^SLCC:

, 

[, 

, 

[^SLCC:

, 

[, 

, 

[^SLCC:...]
OK

ERROR

+CME ERROR

Write Command

AT^SLCC=

[

Response(s)

OK

ERROR

+CME ERROR: <err>

Reference(s)

PIN

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

4

Last

Siemens