Siemens AC75 Manuel D’Utilisation

s

AC75_ATC_V01.002

Page 347 of 569

10/30/06

Confidential / Released

The V.250 

 command may be used to deactivate all PDP contexts which are active or online on the same

interface. This command should not be used to deactivate PDP contexts during the implicit PDP context deacti-

vation procedure which is started automatically after LCP termination or by dropping the DTR line (if 

2 is

configured). For details refer to Section 

The 

 command may also be used to reject a network request for PDP context activation announced by the

unsolicited result codes "

: GPRS". 

• In contrast to GSM 07.07 it is possible to cancel a connection with 

 after a break. This is done for com-

patibility reasons due to the "dial-up network" drivers of Microsoft Windows. 

•

 is used as a standard V.250 AT command, too.

• If 

 is used to reject a network request for PDP context activation, then other PDP contexts on the same

interface which are active or online will not be deactivated.

Exec Command

ATH

Response(s)

OK

Reference(s)

PIN

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

4

Last

GSM 07.07