Siemens Camera Accessories 6AU1900-1AB32-0BA0 Manuel D’Utilisation
Functions
4.10 Specify simulation settings
CamTool
4-36
Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0
4.10.2
Simulation settings
Master tab
You specify here the simulation settings for the Master tab.
You can set the following parameters:
You can set the following parameters:
Table 4-7
Parameters in the Master tab (Simulation Settings window)
Field/button
Explanation/instructions
Setting
Accept from axis
•
(Axis)
When you create the cam for an axis that already exists
When you create the cam for an axis that already exists
in the project, you can select the axis here. The
configured values are taken over and displayed. You
can change the master velocity for calculations.
•
(External encoder)
When you create the cam for an external encoder that
When you create the cam for an external encoder that
already exists in the project, you can select the external
encoder here. The configured values are taken over and
displayed.
•
None
If you select None, you can specify all parameters.
If you select None, you can specify all parameters.
•
Time axis
If you select Time axis, you can specify the unit of
If you select Time axis, you can specify the unit of
measure under Properties.
Properties
(Setting: None)
(Setting: Time axis)
(Setting: None)
(Setting: Time axis)
Linear axis
(Setting: None)
(Setting: None)
If you select this option, you simulate the master axis as a
linear axis.
Rotary axis
(Setting: None)
(Setting: None)
If you select this option, you simulate the master axis as a
rotary axis.
Modulo rotary axis
(Setting: None)
(Setting: None)
If you select this option, you simulate the master axis as a
modulo rotary axis.
Type
(Setting: None)
(Setting: None)
Here you select the axis type.
Unit of measure
(Setting: None)
(Setting: Time axis)
(Setting: None)
(Setting: Time axis)
Here you specify the unit of measure for the axis. Select a
unit of measure or enter the unit of measure. The
representation of the unit of measure is refreshed in the
diagrams when you click Accept or OK.
Note:
The unit of measure is only used for the display. If the unit
Note:
The unit of measure is only used for the display. If the unit
of measure is changed, the represented values are not
converted.