Sansui SLED1937 Manuel D’Utilisation

1

To turn on the TV, press   POWER. (POWER 

indicator on the front of the unit changes green. It 

may take approx. 10 seconds for a picture to appear 

on screen.) The Auto Setup function begins.

Automatic Search

Start

TV Location

Store

Signal Type

Cable

2

Press 

 or   to select “TV Location”, then press   

or   to select “Store” or “Home”. This product qualifies 

for ENERGY STAR in Home mode default setting.
NOTE:

This unit has been preset to STORE brightness. 

This setting does not qualify under ENERGY STAR. 

To reduce brightness and energy consumption, 

change setting to ‘HOME’. This setting does qualify 

under ENERGY STAR.

The device may not conform to the ENERGY 

STAR standard after “Reset” is performed or the 

“Backlight” is adjusted.

•

•

3

Press 

 or 

 to select “Signal Type”, then press 

 or   to select “Cable” or “Air”.

4

Press 

 or 

 to select “Automatic Search”, then 

press   or ENTER. 

5

“Auto Setup” will begin. After the Auto Setup is 

completed, the TV channel appears on the screen.

Depending on the reception condition, it may 

take up to 30 minutes to complete memorizing 

digital cable channels. Please allow the process to 

complete without interruption.

•

If you press EXIT in the process of “Auto Setup”, 

the Auto Setup stops and changes to the normal 

screen.
When you make a menu selection, your changes 

occur immediately. You do not have to press EXIT to 

see your changes.

TV operation
1

To turn on the TV, press   POWER.

(POWER indicator on the front of the unit 

changes green. It may take approx. 10 seconds 

for a picture to appear on screen.)

2

Adjust the volume level by pressing VOL + or – . 

The volume level will be indicated on the screen 

by green bars. As the volume level increases, so 

do the number of bars. If the volume decreases, 

the number of green bars also decreases.

3

Set the Signal Type option to the appropriate 

position (see “Air/Cable selection” on page 18).

•

•

4

Press the Direct Channel Selection (0-9, –) 

buttons to select the channel.

(If you press only channel number, channel 

selection will be delayed for a few seconds.)
TO SELECT ANALOG CHANNELS

1-9: 

Press 1-9 as needed. Example, to 

select channel 2, press 2, then press 

ENTER.

10-99: 

Press the 2 digits in order. Example, 

to select channel 12, press 1, 2, then 

press ENTER.

100-135:  Press the 3 digits in order. Example, to 

select channel 120, press 1, 2, 0, then 

press ENTER.

Press the first 1-3 digits, then press the – button, 

followed by the remaining number.

Example, to select channel 15-1, press 1, 5, –, 1, 

then press ENTER.

If a channel is selected with only audio content, 

“Audio only” will be displayed on the screen.

If a channel is selected with a weak digital 

signal, “Digital channel signal strength is low” 

will be displayed on the screen.

  The same program may be available on either 

an analog channel or a digital channel. You may 

choose to watch either format.

If a channel is selected to which you have not 

subscribed, “Digital channel is encrypted” will 

be displayed on the screen.

•

•

•

VHF

2-13

VHF

2-13

UHF

14-69

STD/HRC/IRC

14-36 (A) 

(W)

37-59 (AA) 

(WW)

60-85 (AAA) 

(ZZZ)

86-94 (86) 

(94)

95-99 (A-5) 

(A-1)

100-135 (100) 

(135)

01 (4A)

If a channel with no broadcast is selected, the 

sound will automatically be muted.

It may take a few seconds for a digital channel 

picture to appear on screen after being selected.

To view a signal from another device connected 

to your TV, such as a VCR player, press INPUT 

SELECT, then press 

 or   or corresponding 

Number buttons (0-4), then press ENTER.

•

•

J3KX1221A_EN.indd   15

J3KX1221A_EN.indd   15

11/12/12   5:09:58 PM

11/12/12   5:09:58 PM