Roberts Radio 63I Manuel D’Utilisation

Allowing a device to connect to Windows Media Player 12

4.   Press the Menu Up or Down buttons until 'Shared media' is highlighted 

and press the Select button to select. The radio  will scan for all available 
UPnP servers. It may take a few seconds for the radio to complete its 
scan. The radio will display '<Empty>' if no UPnP servers are found.

5.   After scanning, select your UPnP server using the Menu Up or Down 

and Select buttons. If you allowed automatic connection previously, 
your radio should now connect and you may skip to the next page. If 
you did not permit automatic connections, your radio will then normally 
display 'Unauthorised' at this stage.

6.   Your PC may prompt you that there has been a connection to your 

UPnP server. Whether prompted or not, in order that the radio may 
access the music fi les, you will need to click the 'Library' tab in WMP  12 
and select the 'Stream...' item to open the 'Media Streaming' window. 
Select  'Automatically allow devices  to play my media' then select 
'Automatically allow all computer and media devices'.

 Alternatively 

select 

'More Streaming options' to enable sharing on a 

'per device' basis.

7.   In the 'More streaming options' window, the radio will be listed as a 

blocked device. Click on the button shown to select 'Allowed'.

 

Note: If you are using Microsoft Windows' fi rewall software, this should 
be correctly confi gured by WMP 12. If you are using third party fi rewall 
software you may need to manually confi gure it to allow your unit 
and WMP 12 to communicate (see the 'Troubleshooting' section on 
page 113).

8.  On the radio, select the named server again using the Menu Up or 

Down and Select buttons. If WMP  12 is now able to communicate with 
your radio you will be presented with some media selection options 
on the display.

4-8

4-8

4-8