Proxim Tsunami MP.11 and MP.11a CPN 65755B Manuel D’Utilisation

The MP.11/a either obtains its IP address automatically through DHCP or it must be set manually.  With 
ScanTool, you can find out the current IP address of the MP.11/a and, if necessary, change it so that is 
appropriate for your network. 

The MP.11/a is shipped with the static IP address 10.0.0.1 configured.   

If you want to set the IP address manually: 

1.  Run ScanTool on a computer connected to the same LAN subnet as the MP.11/a, or directly 

connected to the MP.11/a with a cross-over Ethernet cable. 

ScanTool scans the subnet for MP.11/a units and displays the units it finds in the main window. The 
following figure shows an example of the main window.  If necessary, click Rescan to re-scan the 
subnet and update the display.