TransAct Technologies ITHACA 80PLUS Manuel D’Utilisation
#
Series 80PLUS Operator’s Guide
Connect the Parallel Cable
Back of
Printer
25-pin Parallel
Interface Connector
1.
Unplug the AC power cord from the grounded three-prong power
socket, and turn off the host system or personal computer.
2.
Connect the 25-pin parallel interface cable to the
connector located on the back of the printer.
Refer to the Appendix for information on the parallel cable requirements.
Refer to the Appendix for information on the parallel cable requirements.
3.
Tighten the two mounting screws on each side of the cable connector.