Toshiba Remote Starter ME00070B Manuel D’Utilisation

 

24 

ME00070B 

TMS7 SERIES 

Default Setting: 0 
Description: Allows function adjustments be returned to the 

factory defaults.  
Adjustment: Set to 50 to load default parameter settings. 

Once installed, wired and programmed according to the 
instructions earlier in this manual the TMS7 can be operated. 

 
Local control panel. 

 

 

 
1.  Numeric LED Display: The information being displayed is 

indicated by the LEDs to the right of the display. During 
operation either motor current (Amps) or the calculated 

motor temperature (%) can be displayed. Use the <UP> or 
<DOWN> keys select what information is displayed. In the 

event of a trip state the relevant trip code will be shown. 
If motor current exceeds the maximum current able to be 

shown on the numeric display, the display will show 
dashes.  

 

Start: Voltage is being applied to the motor terminals. 

Run: Full voltage is being applied to the motor terminals. 
Trip: The TMS7 has tripped. 

Remote: The TMS7 is in remote control mode. 
 

 

 

3. 

Operational Push Buttons: These push buttons can be 

used to control TMS7 operation when in local control 

mode. The <LOCAL/REMOTE> push button can be used 
to switch between local and remote control. 

 

 

NOTE: 

When control power is applied to the TMS7 it may 
be in either local or remote control mode according 

to the mode it was in when control power was 
removed. The factory default is local control.