Telus Modem IR1200 Manuel D’Utilisation
iR1200 Modem
31
Dial [ATd]
This command instructs the DCE to originate a call. When the DCE receives the dial string from the computer, all non-
numeric characters in the Dial String that is not recognized dial-modifiers are ignored. This allows the DTE to request
modem numbers containing unsupported dial modifiers, hyphens, parenthesis, and other punctuation.
numeric characters in the Dial String that is not recognized dial-modifiers are ignored. This allows the DTE to request
modem numbers containing unsupported dial modifiers, hyphens, parenthesis, and other punctuation.
Command
D
Action ATd <Dial String>
Query
Range
Parameter
Values (dial
modifiers):
Dial string contains a modem number to be dialed,
translated into an array of ASCII characters between 0
and 9 inclusive
translated into an array of ASCII characters between 0
and 9 inclusive
T = Allowed, but ignored by the modem.
P = Allowed, but ignored by the modem.
! = Hook Flash (1/2 second).
W = Wait for time specified in S7 for dial tone.
(blank) = Wait for time specified in S7 for one or
more rings followed by five seconds of silence before
continuing execution of dial string.
more rings followed by five seconds of silence before
continuing execution of dial string.
, = Pause for time specified in S8
; = After dialing return to command mode.
Hang-up [ATh]
This command instructs the modem to terminate the active call.
Command
H
Action ATh
Query
Range
Request Modem Information [ATi]
This command causes the modem to issue a string to provide product information.
Command
I
Action ATi <request>
Query
Range
Parameter
Values:
0 = OK Response code
1 = iDEN DTE/DCE Specification Version
2 = Software Model
3 = Product Model
4 = Product Manufacturer