Tekkeon MP1800 Manuel D’Utilisation
6
Charging a Device Using an Adapter
1. Select the adapter that fits securely into the power jack on your
portable device and plug it into the input/output cord.
2. Insert the USB plug on the input/output cord into the USB port on
the end of TekCharge.
3. Connect the adapter plug into the power jack on your portable
device.
4. Slide the TekCharge power switch to ON to provide power
through the USB port. The capacity indicator lamp will light
up to indicate the remaining battery capacity as follows:
up to indicate the remaining battery capacity as follows:
Green:
70% - 100%
Orange: 30% - 70%
Red: 0% - 30%
5. Turn on the portable device and use it as you would normally. While connected, TekCharge will power
and/or charge your device.
or
or
Leave the portable device turned off and TekCharge will charge the device battery.
6. When finished, slide the power switch to OFF and unplug the power output cord from TekCharge and
your device.
NOTE: If none of the included adapters fits snugly into your portable device power jack, please go to
our web site at
our web site at
www.tekkeon.com/mp1800adapters
to determine which adapter plug you need for your
device. You can obtain most adapters through the web site, or by contacting Tekkeon by phone at:
1-888-787-5888 or 1-714-832-1266. If available through Tekkeon, the adapter will be sent to you for a
nominal fee.
1-888-787-5888 or 1-714-832-1266. If available through Tekkeon, the adapter will be sent to you for a
nominal fee.
Charging a device
using its USB cable.
using its USB cable.