North Star M1146E Manuel D’Utilisation

 

2

 

2.  Requirements:  6” x 25 lb  x 66.25” I-beam 
 

 

 
3.  Kit will be assembled as shown below. 
 

 

 

4.  Weld the anchor block onto the I-beam.  Anchor block must be centered 

on beam and completely welded. 

 
5.  Install cylinder onto anchor block with the supplied pin and cotter pins.  
 
6.  Log stripper weldment can be welded to the beam or bolted to a 10-gauge 

(0.1345” thick) plate, which is welded to the beam.  If welded to the 
beam, a 10-gauge spacer must be placed between the log stripper 
weldment and the beam to get the proper vertical height for the log 
stripper weldment.  The log stripper weldment must rest against the 
cylinder face to operate properly, as shown below.