KVH Industries TracVisionM5 Manuel D’Utilisation
23
The satellite library in the TracVision antenna
includes two slots for user-defined satellites
(USER 1 and USER 2). You can program one or
both of these library slots for any satellite you
wish that is not already set up in the library.
includes two slots for user-defined satellites
(USER 1 and USER 2). You can program one or
both of these library slots for any satellite you
wish that is not already set up in the library.
To configure a user-defined satellite, you will
need to program into the antenna the following
information about the satellite (see Figure 34):
need to program into the antenna the following
information about the satellite (see Figure 34):
• Satellite name
• Satellite longitudinal position
• Transponder information for all
combinations of polarization and band:
• vertical high
• vertical low
• horizontal high
• horizontal low
OR
• right
• left
• vertical high
• vertical low
• horizontal high
• horizontal low
OR
• right
• left
• Frequency
• Symbol rate
• FEC code rate
• Network ID
• Decoder type
NOTE: You can find this satellite information on the
web at
web at
(neither website is affiliated with KVH).
Name
Longitude
Decoder type
Longitude
Decoder type
Vertical High:
Vertical Low:
Frequency Frequency
Symbol rate
Symbol rate
Symbol rate
FEC code
FEC code
Network ID
Network ID
Horizontal High:
Horizontal Low:
Frequency Frequency
Symbol rate
Symbol rate
Symbol rate
FEC code
FEC code
Network ID
Network ID
Figure 34: Identifying a Linear Satellite
User-Defined Satellites
C
Appendix