Kuzma Turntables Kuzma Stabi Reference Turntable Manuel D’Utilisation

_________________________________________________________________

12

Preparing a functioning turntable for short transport.

You may wish to transport your turntable for short distances in a car (preferably on a
seat). In which case the following precautions should be taken:

1. remove platter and place it its box. Remove belt.

2. remove tonearm counterweight and secure arm rest with tape, elastic band or foam
    insert.

3. remove subplatter, clean oil and put in in its box. See Note

4. disconnect cable to PS and turntable.

5. Put some foam between subchassis and baseplate

6. Tilt of turntable can be only cca 15°, due oil spills.

For longer transport we suggest to put baseplate and subchassis also in original boxes.

When you take off subchassis suspension oil wells are automatically sealed. In case
the base plate is inadvertently held verticaly or upside down for more t han a moment,
it should be then left for 12 hours in horisontal position before use. Of course first you
must remove oil from the shaft and be  shure that ruby ball which is not fixed is
protected.

NOTE: it is possible that ruby ball stays in side of subplatter. If that happened, shake
             subplatter and catch ball.