LevelOne Network Hardware 11g PoE Wireless Access Point Manuel D’Utilisation
42
Chapter 4
PC and Server Configuration
This Chapter details the PC Configuration required for each PC on the local
LAN.
LAN.
Overview
All Wireless Stations need to have settings which match the Wireless Access Point. These
settings depend on the mode in which the Access Point is being used.
• If using WEP or WPA-PSK, it is only necessary to ensure that each Wireless station's
settings depend on the mode in which the Access Point is being used.
• If using WEP or WPA-PSK, it is only necessary to ensure that each Wireless station's
settings match those of the Wireless Access Point, as described below.
• For WPA-802.1x and 802.1x modes, configuration is much more complex. The Radius
Server must be configured correctly, and setup of each Wireless station is also more
complex.
complex.
Using WEP
For each of the following items, each Wireless Station must have the same settings as the
Wireless Access Point.
Wireless Access Point.
Mode
On each PC, the mode must be set to Infrastructure.
SSID (ESSID)
This must match the value used on the Wireless Access Point.
The default value is wireless
Note! The SSID is case sensitive.
Wireless
Security
Security
• Each Wireless station must be set to use WEP data encryption.
• The Key size (64 bit, 128 bit, 156 bit) must be set to match the
• The Key size (64 bit, 128 bit, 156 bit) must be set to match the
Access Point.
• The keys values on the PC must match the key values on the Access
Point.
Note:
On some systems, the key sizes may be shown as 40bit, 104bit, and
132bit instead of 64 bit, 128 bit and 156bit. This difference arises
because the key input by the user is 24 bits less than the key size used
for encryption.
132bit instead of 64 bit, 128 bit and 156bit. This difference arises
because the key input by the user is 24 bits less than the key size used
for encryption.
4