LevelOne Network Hardware 11g PoE Wireless Access Point Manuel D’Utilisation
Wireless Access Point User Guide
70
Data - Admin Login Screen
Login
User Name
Enter the login name for the Administrator.
Change Admin Password If you wish to change the Admin password, check this field
and enter the new login password in the fields below.
New Password
Enter the desired login password.
Repeat New Password
Re-enter the desired login password.
Admin Connections
Allow Admin connections
via wired Ethernet only
via wired Ethernet only
If checked, then Admin connections via the Wireless interface
will not be accepted.
will not be accepted.
Enable HTTP
Enable this to allow admin connections via HTTP. If enabled,
you must provide a port number in the field below. Either
HTTP or HTTPS must be enabled.
you must provide a port number in the field below. Either
HTTP or HTTPS must be enabled.
HTTP Port Number
Enter the port number to be used for HTTP connections to this
device. The default value is 80.
device. The default value is 80.
Enable HTTPS
Enable this to allow admin connections via HTTPS (secure
HTTP). If enabled, you must provide a port number in the
field below. Either HTTP or HTTPS must be enabled.
HTTP). If enabled, you must provide a port number in the
field below. Either HTTP or HTTPS must be enabled.
HTTPS Port Number
Enter the port number to be used for HTTPS connections to
this device. The default value is 443.
this device. The default value is 443.
Enable Telnet
If desired, you can enable this option. If enabled, you will able
to connect to this AP using a Telnet client. You will have to
provide the same login data (user name, password) as for a
HTTP (Web) connection.
to connect to this AP using a Telnet client. You will have to
provide the same login data (user name, password) as for a
HTTP (Web) connection.