Leica GPS1200 Manuel D’Utilisation

All instrument software is stored in the System RAM of the receiver. The software 
can be uploaded onto the receiver using the following methods:

• Using LGO the software is transferred via the serial interface to the Compact-

Flash card in the receiver, which is then stored to the System RAM.

• By connecting the CompactFlash card directly to the computer either via an 

internal card slot housing or an external OMNI drive, the software is trans-
ferred to the card, which is then stored to the System RAM.

Application 
programs

A suite of optional survey-specific application programs are 
available for the instrument.
Some of these programs are freely available and can be loaded 
and are immediately activated. The other programs must be 
purchased and are only activated with a licence key.

Customised 
application 
programs

Custom software specific to user requirements can be developed 
using the GeoC++ development kit.
Information on the GeoC++ development environment is avail-
able on request from a Leica Geosystems representative. 

RX1200
software

For RX1210 and RX1220T. This software covers display, sound 
and communication settings of the RX1210 and RX1220T.