Intel SC5400 Manuel D’Utilisation

Intel® Server Chassis SC5400 User’s Guide

Removing and Installing the Chassis Cover

Removing the Chassis Cover

The Intel

Server Chassis SC5400 must be operated with the top cover in place to ensure

proper cooling. You will need to remove the top cover to add or replace components

inside of the platform. Before removing the top cover, power down the server and unplug

all peripheral devices and the AC power cable.

Note: A non-skid surface or a stop behind the chassis may be needed to prevent the chassis from

sliding on your work surface.

1. Observe the safety and ESD precautions at the beginning of this book. See

“Safety

Information” on page iii

2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord.
4. Remove the access cover screw if it is installed (see letter "A" in the following

figure). While holding in the blue button at the top of the chassis (see letter "B"),

slide the top cover back until it stops. Lift the cover outward to remove it.

Figure 7. Removing the Chassis Cover

AF000555