High End Systems StudioPix Pixelation Luminaire Manuel D’Utilisation
CHAPTER 4
DMX Programming Basics and Quick Start
32
StudioPix™ Pixelation Luminaire User Manual
Quick Start with a Wholehog Console
After Setting up and Configuring the SHOWPIX or StudioPix fixture as outlined in Chapter 2, use
the following steps to get to the point of displaying output.
the following steps to get to the point of displaying output.
Step 1: In the Fixture Schedule window of Wholehog software, Add one Standard and two
Image “fixtures” for each unit.
Image “fixtures” for each unit.
Step 2: Assign user numbers for these items. Set up user numbers 1-3 that correspond to
SHOWPIX or StudioPix unit number 1, where user number 1 is the Standard, 2 and 3 are Image
fixture types. Patch the Standard first and then the two Image fixture types.
SHOWPIX or StudioPix unit number 1, where user number 1 is the Standard, 2 and 3 are Image
fixture types. Patch the Standard first and then the two Image fixture types.