High End Systems StudioPix Pixelation Luminaire Manuel D’Utilisation
CHAPTER 10
Effect Descriptions
68
StudioPix™ Pixelation Luminaire User Manual
Bar Scan
Effect Function parameter DMX value = 4
Selecting the Bar Scan creates a transparent pattern on the image that simulates a vertical line
that scans across the fixture array. This effect responds according to the values set in the
Transparent Color parameter, see Transparent Color on page 43.
that scans across the fixture array. This effect responds according to the values set in the
Transparent Color parameter, see Transparent Color on page 43.
Modifier 1: Adjusts the width of the bar from a single “pixel” wide at a value of to the full width
of the array minus one pixel.
of the array minus one pixel.
Modifier 2: Adjusts the scan rate. At the midpoint of the range (DMX =127-128), the bar
pattern is static. DMX values below the midpoint move the bar in a negative direction along the
x-axis gradually increasing scan speed to a maximum at a DMX value = 0. DMX values above
the midpoint move the bar in a positive direction along the x-axis gradually increasing scan
speed to a maximum at a DMX value = 255 (100%).
pattern is static. DMX values below the midpoint move the bar in a negative direction along the
x-axis gradually increasing scan speed to a maximum at a DMX value = 0. DMX values above
the midpoint move the bar in a positive direction along the x-axis gradually increasing scan
speed to a maximum at a DMX value = 255 (100%).
Brightness and Contrast
Effect Function parameter DMX value = 8
This effect will adjust the brightness and/or contrast of the visible image to create either a more
pastel or a richer color.
pastel or a richer color.
Modifier 1: Adjusts the brightness of the image. At DMX value = 128 (50%) there is no
adjustment. DMX values below the midpoint of the range decrease the brightness to a minimum
at a DMX value = 0. DMX values above the midpoint of the range increase the brightness to a
maximum at a DMX value of 255 (100%).
adjustment. DMX values below the midpoint of the range decrease the brightness to a minimum
at a DMX value = 0. DMX values above the midpoint of the range increase the brightness to a
maximum at a DMX value of 255 (100%).
Modifier 2: Adjusts the contrast of the image. At DMX value = 128 (50%) there is no
adjustment. DMX values below the midpoint of the range decrease the contrast to a minimum at
a DMX value = 0. DMX values above the midpoint of the range increase the contrast to a
maximum at a DMX value of 255 (100%).
adjustment. DMX values below the midpoint of the range decrease the contrast to a minimum at
a DMX value = 0. DMX values above the midpoint of the range increase the contrast to a
maximum at a DMX value of 255 (100%).
Image Effect
Global Effect
Effect Function = 4
Modifier 1 = 0
Modifier 1 = 0
Effect Function = 0
Modifier 1 = 158 (23%)
Modifier 1 = 158 (23%)
Effect Function = 0
Modifier 1 = 255 (100%)
Modifier 1 = 255 (100%)
Modifier 2 = 129–255 (51%–100%)
Image Effect
Global Effect