High End Systems StudioPix Pixelation Luminaire Manuel D’Utilisation

CHAPTER 10 

Effect Descriptions

74

StudioPix™ Pixelation Luminaire User Manual

Effect Function parameter DMX value = 5

Selecting the Target Scan effect creates a transparent pattern on the image that simulates rings 
that scan across the fixture array from the perimeter in or the center out. This effect responds 
according to the values set in the Transparent Color parameter, see Transparent Color on page 
43. 

Modifier 1 : Adjusts the size of the visible target ring from no pixels wide at a DMX value = 0 to 
one pixel less than the total pixel width of the array at a DMX value = 255 (100%).

Modifier 2 : Adjusts the speed of the target scan. At a DMX value = 129 (50%), the ring is 
static. As you decrease the DMX value from the midpoint the rings move from the perimeter 
toward the center of the array with the speed increasing to a maximum at a DMX value = 0. As 
you increase the DMX value from the midpoint the rings move from the center toward the 
perimeter of the array with the speed increasing to a maximum at a DMX value =255 (100%).

Image Effect

Global Effect

Effect Function = 5
Modifier 1 = 0 
Modifier 2 = 0–127(49%)

Effect Function = 5
Modifier 1 = 210 (83%)
Modifier 2 = 0–127(49%)

Effect Function = 5
Modifier 1 = 255 (100%)
Modifier 2 = 0–127(49%)