Gilson Minipuls 3 Fascicule
High Performance
Peristaltic Pump
World Wide Web: www.gilson.com
E-mail: sales@gilson.com, service@gilson.com, training@gilson.com
E-mail: sales@gilson.com, service@gilson.com, training@gilson.com
World Headquarters
Gilson, Inc.
3000 W. Beltline Hwy., P.O. Box 620027, Middleton, WI 53562-0027, USA
Telephone: (1) 800-445-7661 or (1) 608-836-1551 • Fax: (1) 608-831-4451
Gilson, Inc.
3000 W. Beltline Hwy., P.O. Box 620027, Middleton, WI 53562-0027, USA
Telephone: (1) 800-445-7661 or (1) 608-836-1551 • Fax: (1) 608-831-4451
Gilson S.A.S.
19, avenue des Entrepreneurs - BP 145, 95400 Villiers le Bel, France
Telephone: (33) 1-34-29-50-00 • Fax: (33) 1-34-29-50-20
19, avenue des Entrepreneurs - BP 145, 95400 Villiers le Bel, France
Telephone: (33) 1-34-29-50-00 • Fax: (33) 1-34-29-50-20
LT800443E. Printed in France, May 2003. Specifications subject to change without notice.
Gilson, Inc., Gilson S.A.S., and Cyberlab, Inc. are ISO certified.
ISO 9001
Certified
Ordering Information
Gilson’s Minipuls 3 is available as two parts: a speed control module and a pump head.
An accessory package is suplied with the speed control module.
An accessory package is suplied with the speed control module.
Item
Reference N°
Speed-Control Module
F155001
R1 Pump Head
F117604
R2 Pump Head
F117800
R4 Pump Head
F117606
R8 Pump Head
F117608
R2/HF (high-flow) Pump Head
F117830
R4/HF (high-flow) Pump Head
F117831
Technical Specifications
Flow Rate
Standard Model: 0.3 µL/min to 30 mL/min (72 psi/5 bar/0.5 MPa max)
High Flow Model: 1 mL/min to 220 mL/min (42 psi/3 bar/0.3 MPa max)
High Flow Model: 1 mL/min to 220 mL/min (42 psi/3 bar/0.3 MPa max)
Pump Head
Standard Model: 1,2,4 or 8 channel heads with 10 stainless steel rollers per head
High Flow Model: 2 or 4 channel heads with 5 stainless steel rollers per head
High Flow Model: 2 or 4 channel heads with 5 stainless steel rollers per head
Head Speed
Continuous adjustment from 0 to 48 rpm by 0.01 rpm increments
up to 9.99 rpm and by 0.1 increments above 10 rpm
up to 9.99 rpm and by 0.1 increments above 10 rpm
Peristaltic Tubing Diameter
Standard Model: 0.25 to 4 mm (i.d.)
High Flow Model: 2 to 8 mm (i.d.)
High Flow Model: 2 to 8 mm (i.d.)
Tubing materials
PVC for most applications, Viton for chemical inertness, silicone for biocompatibility,
and Pharmed(r) for FDA and USP class 4.
and Pharmed(r) for FDA and USP class 4.
Motor Speed Stability
0.5% for any variation of line voltage, torque or temperature
Line Voltage
90V to 132V for 110 voltage selection: 180V to 264V for 220 voltage selection
Line Frequency
47 to 63 Hz
Power Consumption
Full load 45 W at 220V; no load 35 W at 220V
Operating Temperature
0-40° C No warm-up time required
Input/Output Options
Contact Closure: Two TTL-compatible inputs for control of start/stop and direction of flow
Voltage Input: One 5 V analog signal for variable control of motor speed
Serial: Gilson Serial Input/Output Channel (GSIOC), an RS-422A interface
Voltage Input: One 5 V analog signal for variable control of motor speed
Serial: Gilson Serial Input/Output Channel (GSIOC), an RS-422A interface
Keypad functions
Start, stop, direction of flow, increase and decrease flow, prime.
Dimensions (w x h x d)
15 x 18 x 17.5 cm (5.0 x 7.1 x 6.9 in)
Weight
4 kg (9 lbs)
... wide range of flow-rates,
Gilson robustness and reliability !
High performance liquid transfer ...
Minipuls 3 Series
Peristaltic Pumps
3V MP3 10/06/03 17:27 Page 1