Eicon Networks Diva 2440 Manuel D’Utilisation
Setup
Page 17
USB Cable Notes
•
USB requires Windows 98, Windows 2000, or Windows Millennium Edition. USB will not work
with Windows 95 or Apple Macintosh computers.
with Windows 95 or Apple Macintosh computers.
•
Once the power and USB cables are connected, Windows will request driver files. Follow the
onscreen instructions, as described below.
onscreen instructions, as described below.
Updating or reinstalling USB drivers
If you must reinstall or update the USB drivers, follow the instructions below.
7.
From your desktop, right-click ‘My Computer’, click ‘Properties’, then click the ‘Device
Manager’ tab. The System Properties window opens.
Manager’ tab. The System Properties window opens.
8.
Double-click ‘Network Adapters’, right-click ‘Eicon Diva 2400 Series Virtual LAN Adapter for
USB’, and select ‘Properties’. The dialog box opens.
USB’, and select ‘Properties’. The dialog box opens.
9.
Click the ‘Drivers’ tab and click ‘Update Driver’. Follow the onscreen instructions. You will
asked to insert your Windows Installation Disk, and you will also need the new USB drivers.
The drivers are also located in the USB folder on the Diva CD-ROM.
asked to insert your Windows Installation Disk, and you will also need the new USB drivers.
The drivers are also located in the USB folder on the Diva CD-ROM.
Note: This procedure may vary according to the Operating System installed.
To continue
See
Windows 98
1.
Insert the Diva CD-ROM into your CD-ROM drive.
2.
From the ‘Hardware Wizard’ window, click ‘Next’.
3.
Select the option ‘Search for the best driver’, then click ‘Next’.
4.
When asked for the location of the driver files, select ‘Specify a
location’ and clear all other options. In the ‘Location’ field, type in
D:\USB\WIN98 (with ‘D’ being the letter of your CD-ROM drive), then
click ‘Next’.
location’ and clear all other options. In the ‘Location’ field, type in
D:\USB\WIN98 (with ‘D’ being the letter of your CD-ROM drive), then
click ‘Next’.
5.
Once the driver is located, click ‘Next’ to begin installation.
6.
When installation is complete, click ‘Finish’.
Windows Me
1.
Insert the Diva CD-ROM into your CD-ROM drive.
2.
Select ‘Specify the location of the driver’, then click ‘Next’.
3.
For the location, type in D:\USB\WIN98 (with ‘D’ being the letter of
your CD-ROM drive), then click ‘Next’.
your CD-ROM drive), then click ‘Next’.
4.
When installation is complete, click ‘Finish’.
Windows 2000
1.
Insert the Diva CD-ROM into your CD-ROM drive.
2.
Click ‘Next’.
3.
Select ‘Search for a suitable driver’, then click ‘Next’.
4.
When asked for the location of the driver files, select ‘Specify a
location’ and clear all other options. In the ‘Location’ field, type in
D:\USB\WIN98 (with ‘D’ being the letter of your CD-ROM drive), then
click ‘Next’.
location’ and clear all other options. In the ‘Location’ field, type in
D:\USB\WIN98 (with ‘D’ being the letter of your CD-ROM drive), then
click ‘Next’.
5.
Once the driver is located, click ‘Next’ to begin installation.
6.
When installation is complete, click ‘Finish’.